功能简介
l 恒温恒湿试验箱可对电气、电子、家用电器、汽车、摩托车、化工及其它产品零部件及材料在恒定湿热的情况下，进行高温、低温以及交变湿热试验。
检验其各项性能指标及适应性。
l FQY/GDJS Series Programmable Constant Temperature and Humidity Chamber can be used on electrical,electronics household appliances,automotive and motorcycle,chemicals,other products and materials constant wet heating condition,high temperature,low temperature and alternating temperature humidity test .Test the performance and adaptability.
本设备符合
l GB/T GB/TTest conditions of thermal -humidity test chamber
l GB/T2423.1-2001 GB/T2423.1-2001 Test method of low temperature test chamber
l GB/T2423.2-2001 GB/T2423.2-2001 Test method of high temperature test chamber
l GB/T2423.3-93 GB/T2423.3-93 Test method of thermal-humidity test chamber
规格与技术参数
型号 Model | FQY/GDW-80 | FQY/GDW-150 | FQY/GDW-225 | FQY/GDW-408 | FQY/GDW-800 | FQY/GDW-1000 |
型号Model | FQY/GDJS-80 | FQY/GDJS-150 | FQY/GDJS-225 | FQYGDJS-408 | FQY/GDJS-800 | FQY/GDJS-1000 |
内部尺寸 InternalHxD(cm) | 400×500×500 | 500×600×750 | 600×800×850 | 850×1000×1000 | 1000×1000×1000 | 1000×1000×1000 |
外形尺寸ExternalHxD(cm) | 950×930×1620 | 1050×1070×1870 | 1 | |||
内箱容积 | 100L | 225L | 408L | 800L | 1000L | 1000L |
温度上限Upper temperature limit | +150℃/+200℃ | |||||
温度下限Lower temperature limit | 0℃、-20℃、-40℃、-70℃ | |||||
湿度范围 Humidity range | 20%~98%RH | |||||
温湿度精度/均匀度 Humiture precision/uniformity | ±0.1℃; ±0.1%RH/±1.0℃; ±2%RH | |||||
升温/降温时间 Warming up/cooling down time | 升温约Warming about 4℃/MIN 降温约 Cooling about 1℃/MIN | |||||
温湿度控制器 Control panel | 韩国进口TEMI系列温湿度控制器 South Korea”TEMI”series temperature and humidity controller | |||||
制冷机组 Compressor | 发过进口泰康压缩机组（环保型） Franceas “Tecumseh”Brand | |||||
制冷机组 | 法国进口泰康压缩机组（环保型） Franceas”Tecumseh”Brand | |||||
加湿器 | KD 不锈钢发生器 Stainless deviser | |||||
冷却方式 | 风冷或水冷 Air cooling/water cooling | |||||
加热器 | 镍锘合金加热单元 Nichrome heater | |||||
安全保护措施 Protection device | 超温、过载、超压、漏电、断水、短路、电源缺相、错相保护 Over heating,over loading,over pressure,leakage,water-break,cutting off and power phase dislocation protect | |||||
外壳材料 Housing materials | SUS304拉丝不锈钢板或钢板静电喷塑 Brushed or static plastic spraying on steel plates | |||||
内壁材料 Inner material | SUS304不锈钢 Stainless plates | |||||
保温材料 Insulation material | 超细玻璃棉或聚氨酯泡沫 Extra-fine glasswool or Polyurethane foam | |||||
电源 Power | 220V/380V±10%,50Hz,3P+N+G | |||||
产品标准Standards | Gb10586:湿热试验箱技术条件 Thermal-humidity specification Db10589: 低温试验箱技术条件 Low temperature specification | |||||
试验方式 Testing method | Gb/T2423.1、 Gb/T2423.9、Gjb150.4 | |||||
& 1测条件：室温+25℃和水温+25℃，无试样条件下测得的数据。
注以上内容如变更，怒不通知
& 2高度H包括脚轮高度